2017

Water tester 250 bar

  • testing device for detonators in water under pressure 250 bar
  • constructed for intended explosion (up to 400 bar) - safe rupture membrane
  • stainless steel (1.4301)
  • volume 1,4 L
  • swivel mount with aretation - filled in vertical position, pressed in horizontal, poured out by tilting

Investor: Austin Detonator, s.r.o., Vsetín

Back to references

Filter unit 3x DN150

  • filtering of sorbents or salts from reaction mixtures in water/organic solvent solutions
  • 3x filter bags DN150
  • max. teperature 100°C
  • max. pressure 4 bar
  • circulating of filtrate - membrane pump (60 L/min.)
  • circulating of heating medium - centrifugal pump (20 L/min.)
  • heating rod 3 kW
  • wetted material DIN WNr. 1.4404
  • PLC control panel with touch screen LCD
  • Ex proof

Investor: Synthon, Blansko

Back to references

Conical dryer 4 L

  • laboratory vacuum dryer intended to use in glove box
  • material AISI 316Ti, internal surface grinded Ra<=0,8
  • conical spiral stirrer
  • separated heating jacket (heated by oil from Huber unit)
  • jacket and vessel shell precise machined for close touch and good heat transfer
  • ceramic seal HWS

Investor: Synthon, Blansko

Back to references

Reactor 500 L, 100 bar, 250°C

  • allowable pressure -1 to 100 bar(g)
  • maxmum temperature 250°C
  • volume 530 L (internal diameter 700 mm)
  • wetted material DIN WNr. 1.4404
  • heating jacket (6 bar, 1.4301)
  • internal surface grinded Ra<=0,8
  • double mechanical seal EagleBurgmann
  • 3-bladed stirrer
  • 7,5 kW drive with frequency converter
  • air cooling of bearing
  • variable speed 0 to 680 RPM
  • Ex proof

Investor: JSC Olainfarm, Riga-Olaine, Latvia

Zpět na realizace

Autoclave 2L, 150bar, 150°C

  • material stainless steel 1.4571
  • design pressure 150 bar, max. teperature 150°C     
  • internal coating Halar E-CTFE
  • vessel without bottom outlet, emptying performed manually

Investor: subcontract with Merci s.r.o., Sázava

Back to references

Vacuum dryer VI 64L

  • material stainless steel 1.4571
  • grinded surface, Ra < 0.4 µm
  • rectangular vessel, volume 64 L
  • heating jacket with streaming channels
  • design temperature 180°C
  • design pressure -1 až 0 barg
  • heating removable shelf
  • RTD sensors above each floor
  • GMP compatible - no dead spots, rounded edges = cleaning friendly
  • tempered glass door, vertical parallel movement with gas springs
  • intended for use in glove box

Investor: Teva, Opava, subcontract for BLOCK a.s.

Back to references

Autoclave R301 - 6000L, 60bar, 250°C

  • design pressure -1 to 60 bar(g)
  • maximum temperature 250°C
  • volume total 6000 L, working volume 5300 L (internal diameter 1600 mm)
  • wetted material DIN WNr. 1.4404, interal surface grinded Ra<=0,8
  • heating jacket with streaming spiral (steam 32 bar, 250°C)
  • cooling spiral (water, 1.4404)
  • double mechanic sealing with barrier fluid EagleBurgmann
  • 4-blade hollow hydrogenation stirrer with divided shaft
  • 75 kW drive with frquency converter and cooling
  • variable speed of stirrer 180 to 450 RPM
  • cooling of bearings - oil circulating unit
  • Explosion proof (II 3G IIC T2 outside, II 2G IIC T2 inside)
  • hydraulic unit incl. MaR

Investor: BorsodChem MCHZ, s.r.o., Ostrava

Back to references

Chamber filter

  • chamber filter for separating nitrocellulose (NCl) from water suspension
  • input product - suspension of water with NCl (2-4%), 30m3/h
  • output product - sespension of NCl (15-20%)
  • drum (diameter 1400 mm) with separated filtering meshes partly submerged in sparse suspension
  • drum speed rate 40/hour
  • continous operation - during one turn of the drum solid NCl is settled on the mesh (approx 5cm layer) and solid NCl is scraped off
  • automatic turning off vacuum on currently scraped mesh

Investor: Synthesia a.s., Pardubice

Back to references

Reconstruction of filter-dryer Comber PF 250

  • internal surface grinded Ra<0,4
  • dust filter heating repair
  • oprava vodicích tyčí pro zvedání a spouštění pohonu míchadla
  • doplnění pojezdových antistatických kol na dno filtru
  • výměna elektormotoru (7,5 kW)
  • nový hydraulický agregát se specifikací II 3G IIB T4
  • ovládání procesního filtru na úrovni PLC přímo na stroji (Zona 2)

Investor: Farmak a.s., Olomouc

Back to references

Filter-dryer F1, 6bar, 200°C

  • design pressure -1 to 6 bar(g)
  • design temperature 200°C
  • volume 900 L
  • wetted material AISI 316Ti
  • internal surface grinded Ra<0,8, no dead spots
  • heating jacket (oil, 6 bar, 200°C)
  • filtering area ø940 mm
  • hydro-drive 5,5 kW, 250bar, 0 to 20 RPM
  • stirrer with function "smooth" and "sweep"
  • double mechanic sealing with barrier fluid allowing axial movement
  • hydraulic axial movement of stirrer (zdvih 250 mm)
  • hydraulic lift of bottom
  • filtering bottom on transportable on wheels
  • push out branch DN250 with hydraulic opening
  • liner filling head for contamination-free exchange of the Big Bag
  • Ex proof - inside zone 1 (II 2G IIB Tx), outside zone 2 (II 3G IIB Tx)

Investor: Výzkumný ústav organických syntéz, Pardubice - Rybitví

Back to references

Vacuum dryer 50 L 

  • wetted material stainless steel 1.4571/1.4404
  • working temperature 0°C to120°C
  • design pressure - vacuum
  • heating jacket (steam/water, 3 bar)
  • cooling spiral (water, 6 bar) 
  • working volume 50 L, total volume 80 L
  • internal surface grinded Ra < 0,8
  • CIP cleaning system
  • spiral stirer for powder-like medium
  • el. drive 1,5 kW, 10-30 RPM, frequency converter
  • mechanical seal EagleBurgmann Seccomix
  • tensometric weight sensors
  • part of the experimental line for the processing of radioactive waste

Investor: subcontract for Merci s.r.o., end-user Centrum výzkumu Řež s.r.o.

Back to references

Crystalizer 100 L 

  • wetted material stainless steel 1.4571/1.4404
  • working temperature 0°C to 120°C
  • design pressure - vacuum
  • cooling jacket (voda, 6 bar)
  • working volume 100 L, total volume 130 L
  • internal surface grinded Ra < 0,8
  • CIP cleaning system
  • radar level transmitter
  • anchor stirrer with spring-loaded PTFE spatulas wiping the entire surface of the cylindrical container and bottom
  • el. drive 1,1 kW, 60-120 RPM, frequency converter
  • mechanical seal EagleBurgmann Seccomix
  • part of the experimental line for the processing of radioactive waste

Investor: subcontract for Merci s.r.o., end-user Centrum výzkumu Řež s.r.o.

Back to references

Evaporator 1000 L 

  • wetted material stainless steel 1.4539
  • working temperature 0°C to 150°C
  • design pressure - vacuum
  • heating jacket (water, 3 bar)
  • working volume 1000 L, total volume 1200 L
  • CIP cleaning system
  • radar level transmitter
  • anchor stirrer with spring-loaded PTFE spatulas wiping the entire surface of the cylindrical container and bottom
  • el. drive 5,5 kW, 40-80 RPM, frequency converter
  • mechanical seal EagleBurgmann Seccomix
  • part of the experimental line for the processing of radioactive waste

Investor: subcontract for Merci s.r.o., end-user Centrum výzkumu Řež s.r.o.

Back to references

Testing vessel 120 bar (type ZA12B)

  • 2pcs of devices, type ZA12B is inovated type ZA12A from 2016
  • device for detonator testing in water
  • maximum pressure of testing 120 bar
  • specially constructed for case of overpressure caused by explosion - bottom is released and the device is not destructed
  • trajectory of released botom is controlled
  • elastic fixture of vessel for absorbtion of backkick
  • removable basket for detonators
  • pressure unit for 3 pcs of testing vessels, pneumatic driven liquid pumps Haskel
  • PLC control

Investor: Austin Detonator, s.r.o., Vsetín

Back to references

References 2016 here...


Contact us

VSK Pardubice s.r.o.
Rybitví 312
533 54 Pardubice - Rybitví
Czech Republic

Tel.: +420 466 052 231
E-mail:


technical solutions | design | production


© 2018, VSK Pardubice s.r.o.

Sitemap

Created by eBRÁNA s.r.o. | Powered by CMS WebArchitect | SEO a internetový marketing