2012

Vacuum filter-dryer 2500 L, 3 bar, 150°C

  • material steinless steel 1.4571
  • working temperature -20°C/150°C
  • maximum working pressure 3 bar(g)
  • filter area 1,5 m2
  • grinded surface Ra < 0.8
  • heating jacket, heating bottom (steam, 4 bar(g))
  • stirrer with maximal lift 250 mm, with function "smooth" and "sweep"
  • continous variable speed of stirrer 0 - 30 min-1
  • hydraulic drive, hydraulic stirrer lift and hydraulic bottom lifting mechanism
  • double mechanic sealing

Investor: Bochemie a.s., Vlachovice

Back to references

Filter FT07 (DN1000) and FT08 (DN600)

  • material steinless steel 1.4571
  • working temperature up to 50°C
  • maximum working pressure above screen 3 bar(g)
  • filter area 0,7m2 (DN1000) and 0,22m2 (DN600)
  • volume 500 L and 125 L
  • removable perforated screen with joint ring for filter fabric attachment
  • internal surface (including screen) PFA RubyRed® coating
  • pneumatic lifting mechanism (Ex version) of cover

Investor: Teva, Opava

Back to references

Vacuum mixing dryer 50 L 

  • material steinless steel 1.4571
  • working temperature -20°C to 150°C
  • working pressure -1 bar(g), duplicator 3 bar(g)
  • mechanical sealing EagleBurgmann Seccomix se snímačem teploty
  • working volume 50 L
  • cone screw stirrer for mixing of powders
  • el. drive 1,5 kW, 30 min-1, variable frequency drive
  • grinded surface Ra < 0,4 (internal) a Ra < 0,8 (external)
  • dust filtr for vacuum attachment
  • ATEX  II 2G IIB T3 (inside and outside)

Investor: Zentiva, Praha

Back to references

Vacuum dryer

  • material steinless steel 1.4571
  • working temperature -20°C to 130°C
  • working pressure -1 to 0 bar(g), inside heated wals 1,5 bar(g)
  • internal dimensions W/H/D: 785/1620/525 mm, volume 660 L
  • 10 heating racks
  • heated racks, bottom and door, heating medium - oil
  • nitrogen supply to each rack
  • grinded surface Ra < 0,8, raunded edges = cleaning friendly
  • ATEX  II 2G IIB T3 (inside)

Investor: Zentiva, Praha

Back to references

Chromatographic column CC-514

  • material in contact with medium - stainless steel 1.4571
  • design pressure 5 bar(g)
  • grinded surface Ra < 0,8 (inside) a Ra < 1,6 (outside)
  • filter area 0,43 m2
  • filet stainless fabric Porostar 10 μm supported by removable perforated screen
  • manual bottom and cover lifting mechanism with side-tilt facility for easy cleaning

Investor: Teva, Santhia, Italy

Back to references

Filter dryer 2000 L 

  • material in contact with medium - stainless steel 1.4571
  • design pressure 6 bar(g), heating jacket 3 bar(g)
  • working temperature -20°/160°C
  • internal diameter 1600 mm
  • grinded surface Ra < 0,8 (inside) a Ra < 1,6 (outside)
  • filter area 1,5 m2
  • filter fabric attached by joint ring
  • hydraulic drive
  • stirrer with maximal lift 250 mm, with function "smooth" and "sweep"
  • hydraulic lift of bottom
  • push out branch DN250 mm
  • double mechanic sealing

Investor: VUOS, Pardibice - Rybitví

Back to references

Vacuum dryer GMP 10-3

  • material in contact with medium - stainless steel 1.4571
  • working temperature -20°C to 90°C
  • working pressure -1 to 0 bar(g), inside heated wals 2 bar(g)
  • internal dimensions W/H/D: 750/1620/750 mm, volume 920 L
  • 12 fixed heating racks, product placed in dishes (630x330x50 mm)
  • heated racks, bottom and door, heating medium - water
  • grinded surface Ra < 0,8, rounded edges

Investor: Synthon, delivery to Argentina

Back to references

Intenzification of heating enameled reactor

  • heating of enameled boiler Tenez 6,3 m3
  • heat input 75 kW
  • maximum temperature 240°C
  • heating of oil by steam, pressure 20 bar
  • heating of boiler by oil, 680 L of oil
  • cooling by water 20°C - plate heat exchanger Tenez

Investor: Synthesia, Pardubice - Rybitví

Back to references

Autoclave 1+10 L, 200/100 bar, Hastelloy C-22

  • material in contact with medium - Hastelloy C-22
  • two interchangeable wessels (1 L and 10 L), common cover and rack
  • maximum working temperature 200°C
  • working pressure 200 bar (1 L wessel and cover), 100 bar (10 L wessel)
  • magnetic coupling Büchi
  • interchangeable stirrers - turbine and anchor for each wessel
  • electric drive with fluid converter, 250 W, 0-1200 min-1
  • internal surface grinded Ra < 1 µm
  • elektric band heater attached on wessel (1,2 kW for 1 L, 6kW for 10 L) - EX version
  • cooling spiral (only 10 L wessel) and cooling bottom jacket (water)
  • supporting rack with hydraulic lifting mechanism (cover is fixed, wessel is lifted), manual pressure pump

Investor: VUOS, Pardibice - Rybitví

Back to references

References 2011 here...


Contact us

VSK Pardubice s.r.o.
Rybitví 312
533 54 Pardubice - Rybitví
Czech Republic

Tel.: +420 466 052 231
E-mail:


technical solutions | design | production


© 2018, VSK Pardubice s.r.o.

Sitemap

Created by eBRÁNA s.r.o. | Powered by CMS WebArchitect | SEO a internetový marketing